When it comes to installing paving bricks in landscaping, the first thing that comes to mind is walkways. But do you know that there are plenty of other landscaping ideas with brick pavers you may not have thought of? Here is one worth mentioning.
It is a great idea to lay the clay bricks in a circular fashion in your lawn. Make sure you include alternating layers to ensure stability and perspective. This must go on until the pavement ends near grass. To prevent cracking, finish the pavement two to three feet away from where the grass starts. Place treated lumber posts just inside the circular format and connect the two with a separate, smaller beam to create something like a pergola. Make sure you do this with the help of a paving contractor in Perth.
WHY CLAY BRICKS?
Most of the people will ask why would they consider opting for clay bricks when this can be done easily with any other material like concrete, tiles, etc. Here is a quick guide of the unique reasons to consider brick pavers.
A common problem with concrete and tiles is that they easily attract stains. Oil and other leaking fluids from your vehicles can permanently stain your concrete driveway. Brick, on the other hand, is generally less prone to staining. Moreover, should a section of your designed walkway becomes stained, you can easily replace the brick paver to retain the new look once again.
Repairs on brick pavers are much simpler. The most common problem with concrete is that over time, they can become cracked, pitted, and chipped. Fixing these problems often becomes a troublesome consideration. Sometimes, the entire area needs to be replaced which is not only a pain, but extremely expensive. With brick paver, however, each paver is individual, and can be replaced if they become damaged, which makes them a more cost-effective option in the long run.
Another problem with concrete or tiles is that they can be fairly slippery when wet, and can be dangerous to walk on. Brick pavers are more slip resistant due to their naturally textured and abrasive surface. Therefore, you can create great designs in the pool area without caring about getting wet.
Brick pavers create a stable, safe surface to walk on for every climatic condition thus, making your landscaping ideas reach a different perspective.
Bricks are the most common materials used for construction that can be utilised in many structures. Bricks were originally used for buildings and pavements. They have various benefits like value retention, fire protection, comfort, and also environment friendliness.
What are bricks made up of?
Bricks can be made up of soft slate, clay, concrete, calcium silicate or quarried stone. Whatever the formation is, bricks always provide the best quality. With this, the construction material for the brick pavers is free from pollutants, allergen and noxious insects. The good thing is, they can be easily recycled.
Providing great resistant
Do you know why most of the house owners in Perth prefer brick paving? This is because bricks are known for resisting harsh weather attacks and other dangers caused by natural events. They are also non-flammable, which means they can reduce the damage and consequences of fatal fire accidents. Reports say that injuries in fire accidents are not due to the direct effects of fire, but from the inhalation of poisonous smoke. Since bricks are made up of clay they cannot produce combustion gases that most of the other materials emit during burning.
Providing great insulation quality
Aside from being non-flammable, these construction materials are great thermal insulators. They also have sound breath ability. The bricks are able to absorb the moisture inside before releasing it to the external atmosphere.
Apart from this, brick pavement provide safety to pool areas and driveways. Bricks have a natural texture which is non slippery. When they are laid around the pool, kids and elders have less chance of slipping and falling. Bricks also absorb heat which means your foot will not burn under the scorching sun. Thus, bricks can make the patio and pool area cooler in summer and warmer in winter. And when it comes to driveways, they provide great support. Even if your driveway is prone to immense load from heavy footfall or vehicles coming in and out, brick pavement can hold the ground firmly. They do not form cracks after a certain period.
A brick pavement has the ability to demand a higher market value because of its quality and efficiency. House owners are guaranteed with great deal of money and good investment value. Most of the people in Australia prefer this type of pavement especially for durability, style and colour variations.
Given all these benefits, a brick pavement is surely a wise investment.
The pool side area of your house is the place where you can spend some of your leisure times either alone or with your near and dear ones. Thus, to create a positive environment, the area must be maintained with proper care. Many homeowners fail to maintain an eye catchy pool side area or the place remains unused. But if you have such a beautiful space in your property, then without neglecting it, just use some simple rules to beautify the place and create a good entertainment spot. Discussed below are certain unique ideas of enhancing the pool side area of your house. Check them out –
Clean the debris from pool water
It is mandatory to clean all the debris from the pool water on a regular basis. If required also change the water within it at regular intervals. This will not only help to enhance the entire area but also prevent harmful skin diseases caused by dirty water.
Trim the shrubs
It is quite common for pool side areas to have a wide range of greeneries including floral plants, etc. However don’t neglect to trim the overgrown plants whenever required in order to maintain an appealing look of the entire area.
Install outdoor lights
There are various contemporary outdoor lighting options available in the market which can be purchased and installed in the place accordingly. This is important because apart from rejuvenating the appearance of a pool side space, properly installed lights can also increase the level of security too.
Pave the area
In order to ensure a high level of security and safety, paving any pool side area is definitely a mandatory task. It is always advisable to use skid and slip resistance materials to ensure safety. One such safety material that professional pavers prefer to use for pool sides is the brick paving material. Apart from assuring a higher level of security, it is a durable product that requires very less maintenance.
Use water features
Water features such as artificial fountains, musical cascade, etc can be installed in any place to spruce up its look. Thus, if you want your pool side area to be decorated beautifully and in a unique style, then install any contemporary water feature item according to your budget and make it a different one.
So what are you waiting for? Just start to decorate your boring pool side area by following all the aforementioned ideas and make it a lively one today.
It is often confusing when it comes to choosing the best pavement material. While there is a lot of paving options available, you must be know which one would be ideal for your property.
When it comes to paving the first thing you should consider is care for your feet. Therefore, you should choose a paving material that fulfills the above requirement as well as add colour, pattern, and texture.
There are basically two types of paving materials available for pavement. The first is the quarried stone and the other is the composite material. Materials like granite and stone fall in the category of quarried stone which are crushed, cut or split into different shapes. On the contrary, composite materials consist of products like bricks and concrete. These materials are moulded and processed when they are soft and then baked under intense heat or allowed to dry.
Among these two forms of materials, brick provides the best quality and can be maintained with simple measures. Paving services in Perth often come up with innovative ideas and they are dedicated to promote the beauty of brick pavement. But the same beauty can be spoiled if you don’t follow the basic maintenance rules. So, here are some general tips to keep your brick pavement shining.
The first step would be to identify the stains. If you want to use any cleaning solution, make sure that it is safe. Determine whether it is necessary for the cleaning or just normal mopping will be enough. However, before applying any cleaner identify the type of stain and make sure you read the precautions on the label. Before applying on the full pavement, test the cleaner on a small and inconspicuous patch for unwanted reaction. This will help you to save your time, money and effort.
Types of stains:-
If you notice a thin and white film on the surface of the pavement, it is white scum. It remains invisible when the pavement is wet, but appears as soon the surface becomes dry. White scum occurs when mortar stains are tried to be removed forcefully or while trying to repair the joints of brick blocks with high clay content. Water scum is ineffective to detergents and hydrochloric acid (salt spirit). However, the situation can improve if cleaned with proprietary cleaner.
Light coloured bricks contain vanadium salt which discolours the pavement. One advantage of these stains is they are not permanent or harmful. The stains appear green, yellow and reddish-brown. They generally fade after a certain period. However, you can remove them faster through sodium hypochlorite or oxalic acid.
Ultimately, brick is the best material for your pavement which delivers the best beautification and is the ultimate carer of your feet.