A rainwater tank is the key aspect of rainwater harvesting system. However, you must consider the various components in the system so that the water quality does not get affected. Thus, identify the important components of rainwater harvesting system before planning to install one.
Remember, the components which are listed below can be of a good quality only if you purchase the rainwater harvesting sytem from a reputed supplier of water treatment systems in Cork.
Gutter Guard Screening
Invest in gutter screens if your home surrounding is prone to bush and trees. It might be a good idea to prevent leaves and debris from building up and blocking the gutters. Free flow of rainwater is obvious.
Rain Head/Leaf Eater
Rain heads are also known as leaf eaters. They deflect leaves and debris to prevent their entry into the pipes that carry water. They are installed just below the gutter downpipe, at the top of the pipework that directs rainwater into the tank.
It is important to install tank screening to prevent mosquitoes, insects and debris from finding their way into the tank. This screening is installed on top of the tank.
Installing water diverters is a good idea when your tank water is distributed in the home. When it rains for the first time, it often contains dust and debris. Thus, to divert and flush this dirty water away from the tank, water diverters are a good component.
When choosing rainwater storage, first determine the requirement of water in your house and the storage capacity on the roof. Identify an appropriate site in your property to install the water tank, or you can also opt for multiple short storages.
Rainwater tanks have a hole at the top to let out the excess water through a piping connected with it. It is important to divert the water away from the building and other structures to avoid forming moss and damaging them. It is a good idea to design your garden effectively to soak up excess rainwater or install a separate stormwater detention tank where excess rainwater can be stored.
Pump and Filtration
To use tank water throughout the property, a pump is a vital installation. Filtration should also be installed, especially if the water is used for drinking or cooking purpose.
It is important to know about these important components while you are using rainwater. To ensure safe water flow throughout the building, it is recommend to install a rainwater harvesting system from reputed water treatment systems in Cork.
Choosing the correct pump for residential usage is not an easy job. The choice differs from one house to another. If you experience irregularities and scattered directions in the flow of water, it means that there are mainly two considerations needed to be taken into account for overcoming the problems.
If you are looking to extend your home or planning to set up a new water system it would be a smart choice to install a larger pump to cope with the demand. Installing new pumps will ensure correct and adequate water flow to every outlet in the house. It would provide a consistent and continuous flow.
Always remember, switch on your pump only if the water tank holds enough water in it. If the water level is low, air gaps can form in the pipeline which may cause damage to the pump. You might need to replace the entire pump if the water chamber in the pump fills with air. This is why always check the water tank before switching on your pump. You can also install a sensor inside the tank. The sensor comes with an alarming bell which is attached outside the tank. When the water level reaches the sensor, the bell starts to ring. This way you can be aware of the water level without opening the tank.
- The first and the foremost consideration is to repair the existing pump. A low grade pump can lead to such problems.
- The second thing is to determine the pump’s horsepower. Generally, the horsepower is mentioned on the body of the pump, but in case you do not find one, it is better to call a water pump supplier in Cork.
Generally, the water flow rate for domestic purposes is twenty litres per minute. The size of the pump depends upon the size of the house and the number of water outlets it has.
Finally, the sound of the pump really matters a lot. There are some pumps which have smaller pressure tanks and this creates lot of noise which can be disturbing. Moreover, a pump which creates loud noises consume a large amount of electricity. Therefore, to minimise this, you need to buy an energy saving pump. It comes with a large pressure tank to reduce the extra noise and electricity.
Thus, you can see that installing a perfect pump in your home must be configured properly. However, it can be made easy if you hire a water pump supplier in Cork.
Water pumps can be used for residential as well as commercial purposes. These pumps provide continuous water supply and are basically used in various places, including commercial establishments, hospitals, houses, aquariums and so on. If you don’t install a quality pump for your requirement, then you can have to face numerous problems in future. And none but a reputed water pump supplier can provide you with the best product. So in order to get the most ideal pump, you need to find a good supplier too. There are plenty of water pump suppliers who will guarantee to offer you a quality item. But before proceeding with the purchase, you must conduct a minimum amount of research work. Stated below are the most effective tips for finding and appointing a reliable water pump supplier in Cork –
Get multiple quotes
As stated earlier, that there are several water pump suppliers readily available with their products. However, if you want to get nothing but the best, always get at least three quotes from three different professionals. By doing this, you can have an idea about the product type, price structure and other details offered by each supplier.
Ask your neighbours and friends about your preferred water pump supplier, in case they know about the business from a past experience. Know whether they have purchased a product from the professional or not. If yes, then acquire some details about the product too. The more you interact with people, the less trouble you will have to face while choosing a reliable supplier.
Know their experience
If you really want to get a premium quality product, then you must contact with an experienced supplier. This is because an experienced supplier would know which product is the most suitable for your needs. It is advisable to have a face to face communication with a rep of the company and ask directly about their experience in the field. Also, you must ask about the installation process and how much they charge for installing a pump. If you ever have any doubt or question in mind related to their service, then get it cleared without any hesitation.
Make the final appointment
After going through all the aforementioned processes, the final step comes where you need to make the final appointment with your preferred supplier. If you have a specific day on which you want the work to be done, then let them in advance. Otherwise, they can provide you with a specific day according to their availability.
So get ready to enjoy the perks of continuous water supply by installing the best pump today.